Structure for Agitators :
1:It is usually composed of a stirring shaft and stirring blades. The blades have various shapes (such as spiral, paddle, anchor, etc.) to meet different stirring needs.
Torque transmission type for Mixing Agitators:
Direct drive: The motor is directly connected to the agitator shaft through a coupling, with simple structure and high efficiency, suitable for small and medium-sized agitators
Gearbox drive: The torque is transmitted through the gear box, which can achieve deceleration and torque increase, suitable for high power and low speed mixing
Belt drive: The torque is transmitted through the belt and pulley, which has a buffering and shock absorbing effect. Suitable for small and medium power and speed regulation.
Magnetic coupling transmission: Torque is transmitted through magnetic coupling without mechanical contact, suitable for occasions with high sealing requirements, such as chemical and pharmaceutical
Features For Stainless Steel Agitators：
1：Main materials: carbon steel, titanium alloy, stainless steel, duplex stainless steel, Hastelloy, Monel, PTFE
2：Max. Operation Pressure：10Mpa
3：Max. Operation Temperature：300°C
4：Shaft Diameter：25mm~160mm
5: R/min：0-1500rpm
6: Power：0.25-400kW
7：Polished/ground surfaces or abrasive blasting
8：Flange：ASME B 16.5 , ASME B 16.47
三：Optional Seal for Agitating Mixers：
Gland packing
Safety labyrinth seal
Lip Seal
Single mechanical seal
Double Mechanical seal
Magnet Seal
Magnetic fluid seal
四：Agitators Application
Pesticides and fertilizers
Biopharmaceuticals
Environmental protection treatment
New Energy
Petrochemical
Pharmaceutical Chemicals
Pulp and paper
Minerals processing